Kernel

Analog Voice/Fax over IP Gateway

Benefits

	Toll bypass voice/fax communications
	PSTN voice quality
	Connects directly to the PBX or digital carrier service
	Turnkey solution

's analog MultiVOIP gateway provides toll-free voice and fax communications over the Internet or Intranet. By integrating voice and fax into your existing data network, you can realize substantial savings on inter-office long distance toll charges. The analog family is available in one to eight-port models. All gateways can connect directly to phones, fax machines, key systems, PSTN lines, or a PBX to provide real-time, toll-quality voice connections to any office on your VOIP network.

For Avaya™ Communication Manager environments, extends the call features of a centralized Avaya™ media server and provides local office survivability to small branch offices of up to 15 users using analog or IP phones.

Features

	1-, 2-, 4-,or 8- analog ports for communication over an existing IP network
	or the Internet
	Ethernet connectivity and full IP compatibility with existing routers and
	WAN infrastructure
	FXS/FXO and E&M connectors on each channel for direct analog connection to
	phones, key telephones, PBX extensions, PSTN lines or PBX trunks (MVP130
	supports FXS and FXO)
	Supports H.323 or SIP for sending voice over the Internet
	Single Port Protocol (SPP) allows the use of dynamic IP addresses
	PSTN fail-over automatically routes calls over the PSTN network if the IP
	network is down
	Supports H.450 supplementary services to provide for call transfer, call
	forwarding, call hold, call waiting and name identification
	Voice compression to 5.3K bps per call with support for multiple
	algorithms, including ITU G.723 and G.729
	T.38 real-time fax relay for interoperability among other VOIP equipment
	Configuration and management using a Web browser or Windows

Specifications

Analog Models
MVP130-GB - 1-Port VOIP Gateway
MVP210-GB - 2-Port VOIP Gateway
MVP410-GB - 4-Port VOIP Gateway
MVP810-GB - 8-Port VOIP Gateway
Specifications
Number of Ports: 1, 2, 4 or 8
Port Interface: FXO, FXS & E&M support on each port (MVP130 supports FXS and FXO)
FXS Interface: KTS, telephone set, or fax; ground and loop start
FXO Interface: PBX station; CO line, loop start, 2-wire
E&M Interface: PBX E&M trunk; 2- or 4-wire
E&M Signal Types: I through V
Dialing: DTMF or pulse
Connectors: 1 RJ-48 (E&M); 1 RJ-11 (programmable FXS or FXO) per port
LAN Port
Format: Ethernet/Ethernet II or SNAP
Interface: 10/100BaseT
Command Port
1-, 2-Port & Digital Interface: RS-232C/D; RJ-45 (RJ-45 to DB9 cable included)
4- & 8-port Interface: RS-232C/D; DB25
Speed & Format: 115.2K bps asynchronous
Protocols
H.323 V4, SIP, H.450.2-H.450.4, H.450.6 & H.450.8, RTP, RTCP, SMTP, Q.931, Q.Sig, T.38 & Group 3 fax relay, DTMF out-of-band (RFC Z833))
Bandwidth Management
G.711, G.723, G.726, G.727, G.729 & proprietary voice compression, silence suppression, VAD, CNG
Voice Quality
DiffServ, G.165, G.168, adaptive echo cancellation, forward error correction, bad frame interpolation, tunable latency, dynamic jitter buffers
Management
Web browser, Windows, SNMP agent, MultiVOIPManager, flash upgradeable
Power
Voltage & Frequency: 115v/240v AC, 47/60 Hz
Power Consumption: 1-Port - 4.5W, 2-Port - 19W; 4- & 8-Port -4 6W; Digital models - 27W
Dimensions
1-port model: 4.3" w x 1.0" h x 5.6" d; 8 oz.
(15.8 cm x 3.6 cm x 22.9 cm; 0.92 kg)
2-port model: 6.2" w x 1.4" h x 9.0" d; 2 lbs.
(15.8 cm x 3.6 cm x 22.9 cm; 0.92 kg)
4-port & 8-port model: 17.4" w x 3.8" h x 8.0" d; 7.4 lbs.
(44.2 cm x 9.5 cm x 20.3 cm; 3.4 kg)
Certification
EMC: FCC Part 15 Class A, EN55022, EN55024, EN61000-3-2, EN61000-3-3
Safety: CE, UL 60950, EN60950, cUL, ACA TS-001
Telecom: FCC Part 68, CS-03, TBR21